Antennas for TVs can be very annoying. Some TV stations’ analog signals have a propensity to wander. It can be challenging to get them to start working continuously on this. Your outdoor antenna decides to malfunction just as the action is about to reach its climax. You fall back in your chair, wishing you had increased the signal strength of your outdoor antenna, as the poor reception prevents you from hearing the bursting cheers.
Knowing how to improve the signal from your homemade outside TV antenna will help you avoid the disappointment and annoyance of missing game-winning goals or having your favourite series cut off. However, there are a few techniques you may do to attempt and get a stronger signal from your outdated TV antenna. The measures you must take to attempt this aim are outlined in this article. Let’s check them out!
How to Boost Outdoor TV Antenna Signal Homemade
1 Connect Your Outdoor Television To A Signal Booster
Installing a TV signal booster should be your first step before trying any other techniques. You may rapidly strengthen the connection to your outside television by installing a TV signal booster. In order to access a wider range of frequencies, a signal booster is a small device that applies an AC current to your coaxial connection. The majority of modern variants of these boosters may be purchased online and plugged into a USB port rather than requiring you to screw a port into your TV.
2. Expand The Height Of The Antenna
Adjusting the height is one of the most crucial things you can do to make sure your outdoor television receives the optimum signal. Your signal strength will rise right away if your antenna is placed high enough to have a clear line of sight to transmission towers. Your antenna needs to be pointed directly towards the transmission towers. If you don’t know where they are, use Google to locate the ones that are nearest to your house. For the best possibility of obtaining a strong signal, the antenna should be placed where there are no obstructions, such as structures or trees.
Any obstructions inside the antenna’s field of view could split radio frequency waves. They arrive at your antenna out of phase as they bounce from surface to surface. Pixelation or perhaps no picture at all may occur from this. Since most homes are far from the closest television stations, it might be difficult to maintain a clear line of vision. It is advised that antennas be positioned as high as possible to improve the likelihood of avoiding obstructions in order to solve this problem.
3. Change The Location Or Position Of The Antenna
Location and position are the two elements with the greatest impact on antenna signal reception. You may improve the signal from your homemade outdoor TV antenna by learning how to leverage those characteristics to your advantage. Finding a spot with better coverage is a very affordable option to improve your signal and put an end to interrupted sporting events. One of the simplest solutions to your signal issue is to move the antenna to a better location.
One of the biggest causes of weak signals in homes is poor positioning. In addition, people spend years pondering why their reception is poor yet struggle to understand that it might only require shifting the antenna to a more advantageous location. If your antenna is a contemporary design, you’ll see that it has a meter on it that gauges the intensity of the signal. You might spend less time looking for areas with strong signals by using this device to help you select where to put the antenna.
4. Verify The Waterproofness Of Your Cable Connections
Your TV signal’s quality is significantly adversely affected by bad weather. You must inspect the connections between your outside television and the coaxial wires to make sure all of your cables are weatherproof. You’ll have to waterproof them if necessary. You must unhook your coaxial line so that you can clean and dry it before you can waterproof the antenna.
After re-plugging it in, cover the connection with water tapes, such as duct tape or electrical tape. Hardware grease is another way to guarantee that your wire connections remain weatherproof. Grease the connector and core of the cable after unplugging it. The cord can then be plugged back in.
5. Prevent Utilizing Different Gadgets And Wireless Antennas
When trying to boost your signal, stay away from all wireless devices if at all possible. This is due to the fact that they do not offer as strong of a signal as wire-based options. Additionally, you must take into account your other wireless devices, such as your internet router, while thinking about wireless antennas. Although a wireless router makes it simpler to have a strong internet signal, an antenna does not.
This is due to the possibility of interference between them, which could ultimately result in a weak TV signal. A reduced signal speed could also result from nearby antennae, such as those of neighbors and other wireless devices. This is because the signal of your outside TV can be impacted by numerous antennas and devices operating at once.
6. Place a Distribution Amplifier
A distribution amplifier strengthens a signal after splitting it. Typically, these amplifiers are mounted inside the home. They are basic devices with just one piece, unlike preamplifiers. If you have splitter loss in a house with several televisions, purchase a transmission amplifier.
The decreasing signal can be fixed simply but effectively by adding a transmission amplifier if your splitter serves multiple areas in your home. Use a drop-amp while installing a distribution amplifier. You must have an AC outlet within four feet of the amplifier in order to power it.
7. Stacking of Antennas
Simply placing two or more antennas close to one another will enable antenna stacking, one of the finest methods for enhancing homemade outdoor TV antenna signals. One antenna is typically stacked on top of the other. Signal strength can be increased by two or three times via antenna stacking. The reception of the antenna is enhanced when multiple antennas are pointed in the same general direction. The signal range widens as a result. To achieve the best results from antenna stacking:
- Metal-to-metal antennas are required.
- They must all be pointing in the same direction.
You will need a splitter, convolution, or signal joiner to combine the signals from two antennas. Since they all accomplish the same task, any one of these three objects will function. One cable will connect all of the antennas to the television. The cables should be kept as short as feasible while stacking. Additionally, the length of both cables should match. Signals combine flawlessly when cables are equal. Alternatively, you will receive poor reception since the signals would cancel one another out.
8. What Leads to Homemade Outdoor TV Signal Disruption?
Outside, climatic, physical, and man-made elements all have an impact on television broadcast signals. These three elements obstruct radio frequency signal transmission and interfere with television reception.
- Broadcast transmissions are greatly reduced by tall structures, hills, and trees blocking the line of sight from the transmitting tower to the antenna.
- Radio signals may fluctuate due to changes in the atmospheric pressure system.
- Storms and other severe weather can disrupt broadcasts or, at most, create minor fluctuations.
- There may be a lot of electrical interference in cities. Streetlights going on or off might also momentarily obstruct visibility.
The Bottom Line:
It can take a lot of trial and error to figure out how to increase your homemade outdoor TV antenna signal, but fortunately, you can start by utilizing any combination of the advice we’ve provided. Most of the time, your reception can help you fix the issue. Rarely, despite using every trick in the book, you could still encounter weak signals and channels that won’t load. When you reach this stage, it’s time to make a help request. You can delegate the installations and modifications to a professional.
Calling a technician for assistance shouldn’t be interpreted as giving up. It is the best course of action. When done incorrectly, some parts of installing an outside antenna pose a serious risk. We highly suggest against trying to install an antenna if you are unfamiliar with the process. You’ll have to spend some money on upgrading your outdoor antenna setup and accessories. The price is far lower than monthly cable rates, nevertheless. All the above tricks will help you to boost homemade outdoor TV antenna signals and watch your favourite shows uninterruptedly.
She graduated with a Bachelor of Arts (B.A.) and A.B.J. in Journalism from the University of Georgia. She has 13 years of experience in content writing. She writes about money, finance & science-related articles. Her articles have been featured in popular magazines like CNN, Vogue & ELLE.